Homologated: CE Approved
Load capacity: 2000 KG (4400 LBS)
Fitting: Alo Euro-Norm
Specifications |
|
|
Benefits |
|
|
Application |
|
|
Extra Information |
Maximum load capacity: 2.000 kg |
|
Connection |
ALO Euro |
|
Info |
Manual operation, center |
|
Loadcenter distance |
- mm |
|
k2Pin above Ø |
30 mm |
|
c2Pin under Ø |
20 mm |
|
Safe work Load |
- kg |
|
bThickness |
40 mm |
|
Width |
1110 mm |
How to ensure proper fitting:
Remove any harness that may be in place on your loader. Measure the total width outside the arms of the loader. Then measure the distance between the 2 loader arms. (Inside the arms)
-
The outside measurement should not exceed 1110mm (43-1/4'')
-
The inside measurement should not be shorter than 860mm (33-7/8'')
-
The 4 pins that hold the Quick Change Frame in place are 30mm (1-3/16''). If the holes on your loader are larger, you can still fit the harness with bushings (not included).
If measurements are within these parameters, the harness will fit your tractor front loader.
DOWNLOAD THE GUIDE FOR PERFECT FIT
How to install:
You will need: an 11/16'' ratchet and a grinder or metal saw (only if using the supplied spacer bushing)
-
Remove all 4 pins on your new harness by removing the 4 bolts and securing them in place.
-
Put harness in place. Use your hydraulic on the tractor to help align the holes.
-
Put back the 4 pins in place. Don't push the bolts yet! If there is any gap between the harness bracket and your loader arms, use the supplied spacer bushing by cutting it to the right length to ensure your loader arms are tight fit inside the bracket. This will prevent the loader from moving from left to right.
-
Put the 4 bolts back in place to secure the pins in place.
It's that easy! It takes only about 5-10 minutes
WARNING: Exceeding the maximum load capacity may result in serious accidents, injuries, or deaths. The operator must ensure that they do not exceed the certified weight limit marked on the equipment certification label. Agri-Can assumes NO responsibility for any accident caused by negligence or misuse of equipment.
IMPORTANT: Customers must make sure about the pin size on their actual loader. If our item pins are a different size than the ones on your loader, some small modifications will have to be made by the customer (sleeves, bushings) which are not included. Any modification performed on our item will void the warranty. Any return, other than under warranty, will be at the customer's expense including freight charge and a 20% restocking fee. Item must be new and have never been used to get a refund or an exchange.
Very strong and fits perfectly on my loader. Just wow!!